How to reset Apple TV without a remote

If you have an Apple TV, there is a way to reset the device without a remote.

The how to connect apple tv to wifi without remote is a question that pops up in the Apple TV community quite often. If you ever find yourself asking this question, there are a few ways to reset your Apple TV without a remote.

If you have an Apple TV, you’ll need the remote to use it. However, if you’ve misplaced or damaged your remote, this may not be feasible. When you have an issue with the gadget, it may be much more difficult.

The TV, for example, does not react after being restarted. You’ll have to find out how to reset Apple TV without a controller for some of these issues.

Even if your Apple TV is frozen, there are many methods to operate it without using the remote. This will enable you to reset or restart the gadget.

You may also disconnect and re-plug the power cable to provide a temporary remedy.

Table of Contents

To reset Apple TV without a remote, you’ll need the following items.

However, if you are unable to reset Apple TV 4K due to a lack of a remote, you must first comprehend the following:

You’ll need a reliable internet connection.
Having an iOS device is advantageous.
You’ll need an iTunes account to get started.
A computer is required.

Once you’ve done so, you may restore Apple TV without a remote using the techniques below.

1. For iOS devices, use the Remote App.

You may use your iOS smartphone to control your television and to reset it if it keeps freezing. To get started, follow these steps:

Ascertain that your Apple TV is linked to your television.
Connect the gadget to your Wi-Fi network after turning it on.
If you haven’t already, use an Ethernet wire to connect your new Apple TV to your Wi-Fi network.

Set up your iOS device to start managing Apple TV to finish setting up Apple TV without a remote.

Join the same Wi-Fi network as the Apple TV using your iOS smartphone.
After that, go to Control Center and add Apple TV Remote.
Activate the Control Center.
Select the Apple TV icon from the menu bar.
Choose your Apple TV.
Connect your iOS smartphone to the Apple TV and enter the four-digit code shown on the screen.
Next, navigate to Settings in the Remote Control Center program.
Depending on your Apple TV model, go to Systems or General.
Choose Reset.

When you hit Reset, you’ll be able to restore Apple TV to factory defaults. You’ll be able to control Apple TV in HD without using a remote.

It also works with 3rd and 4th generation devices.

2. Take use of your computer

Using the iTunes software on your computer, you may hard reset Apple TV. Here’s how to do it.

Remove all of your Apple TV’s wires. This contains the HDMI cable as well as the power cable.
On your computer, launch iTunes (Mac or PC)
Connect your device to the computer using the original USB cord. For 4K and 3rd generation devices, use the USB-C or micro USB cable, accordingly. Connect the power wire after that.
The gadget will be flashing.
Look for the Apple TV symbol on iTunes.
Go to the Summary page.
Choose Apple TV.
Select Restore Apple TV from the drop-down menu.

A pop-up notification will display confirming that the factory reset of your Apple TV was successful.

3. Without a remote, connect Apple TV to Wi-Fi.

Follow the instructions below to connect Apple TV to Wi-Fi without using a remote:

Connect the Ethernet wire to your Apple TV to begin setting it up.
On your iOS device, download and install the Remote app.
Navigate to Settings in the app.
Select General.
Choose your remotes
Learn how to use a remote control
Start by pressing the Start button.
Follow the directions on the screen.

Allow the procedure to start sending remote signals and connect the two devices. If all goes well, your Apple TV will get a new remote. Next:

Unplug the Apple TV’s Ethernet cable.
Go to Wi-Fi settings using the new remote.
Set up your Wi-Fi in the usual way.

Your TCP/IP will be configured by the device.

Conclusion

Unplug Apple TV from the power supply and then connect it back in if you want to reset it without a remote. You may also operate your Apple TV using your iOS smartphone.

If you don’t have an iOS device and want to reset the TV, you may use iTunes on your PC to start the procedure.

The how to control apple tv without remote is a question that many people have. If you are looking for an answer, this article will help you out.

Frequently Asked Questions

How do I do a hard reset on my Apple TV?

To do a hard reset on your Apple TV, press and hold the power button for 10 seconds.

How do I connect Apple TV to new WIFI without remote?

To connect your Apple TV to a new WIFI network, you can follow these steps: 1. Open the Settings app on your device. 2. Select Wi-Fi networks and select Add Network. 3. Enter the password for the network that is not yet connected to your device. 4. Select Connect when prompted to connect with that network. 5. The next time you open up the Settings app, it should be listed as an available network in your list of Wi-Fi networks

Related Tags

reset apple tv from iphone
how to reset apple tv 1st gen
reset apple tv remote
apple tv remote not working
apple tv remote app